Width Of Bag: | |
---|---|
Width Of Bottom Of Bag: | |
Center Distance Of Bottom: | |
Cutting Length Of The Valve: | |
Cutting The Length Of The End Of Patch: | |
Capacity: | |
Cooling Water Requirements: | |
Availability: | |
kxt-vb680
KOXTE
8477800000
New generation block bottom valve sack conversion line adopts hot air welding technology to produce laminated pp woven sacks.
Block bottom valve sack is the most well known sack style in the world. It shares many advantages compared to other style sacks such as high strength, low cost, improving filing speed, suitable for automatic insert filing line, great environment protection, stably palletize, high efficient transportation, easy remark, etc. This line is widely used in cement, fertilizer, grain, feed, chemical material industry for packing powder and granule.
ata
Bag size range: | |
Bag width | : 350-600 mm |
Bag length | : 450-910 mm |
Bottom width | : 80-160 mm |
Open bottom width | : 170-340 mm |
Bottom center distance | : 350-750 mm |
Tube cut-off length | : 530-1090 mm |
Valve: | |
Flat fabric width | : 170-330 mm |
Cut-off length | : 80-200 mm |
Bottom cap: | |
Flat fabric width | : 75-175 mm |
Cut-off length | : 230-480 mm |
(Bottom width > 160mm is possible only for open-mouth bags.) | |
Output (Production speed): | |
For bottom width < 140mm | : Max. 110 pcs/min |
For bottom width > 140mm | : Max. 95pcs/min |
(Depending on material properties and bag dimensions.) | |
Installed Power: Power (Excluding air compressor) Power supply | : 88Kw, : A.C., 3-phases, 380V, 50Hz, Neutral |
Compressed air requirements: | |
Pressure | : 6 Bar |
Capacity required | : 120 m3/h |
Cooling water requirements: | |
Temperature | : Max. 18ºC |
Ambient air requirements: | |
Temperature | : 16ºC-40ºC |
Relative humidity | : Approx. 60-95% |
Space requirements: | |
Overall dimension (L×W×H) | : 14000×7000×2280 mm |
Sample: